山東恒冠管業有限公司

    地址:山東濰坊臨朐呂匣工業園

    電話:0536-3773555

    手機:13173105908

產品展示

您現在的位置:首頁>產品展示

PE過路頂管


關鍵詞:

PE過路頂管

  鋼絲網骨架聚乙烯復合管是以包覆處理后的高強度鍍銅鋼絲連續纏繞成型的芯層為增強骨架,以高密度塑料(聚乙烯)為基本材料,采用專業的熱熔膠(高性能改性聚乙烯粘接樹脂),在生產線上通過連續分次擠塑復合成型的管材。

  廣泛應用于長距離埋地供水。供氣管道系統,是目前國內替換鋼管等傳統管道的優選管材。

The steel wire mesh framework polyethylene composite pipe is a kind of reinforced core layer formed by continuouswinding of coated high strength copper-plated steel wire, and high density plastics (polyethylene) as the basicmaterial. It adopts professional hot melt adhesive (high-performance modified polyethylene adhesive resin) tocontinuously extrude and compound the pipe on the production line in stages.
It is widely used in long-distance buried water supply. Gas supply pipeline system is the preferred material forreplacing traditional pipes such as steel pipes in China.

產品性能

  ◆具有超過塑料管強度的較高強度、剛性、抗沖擊性。雙面防腐,具有與塑料管相同的耐腐蝕性能。

  ◆使用溫度提高, 導熱系數低,冬季使用外壁不需要保溫,夏季使用亦不結露。

  ◆內壁光潔,不結垢,水頭損失比鋼管低30%。

  ◆管道連接采用電熱熔連接, 技術成熟,電熱熔接頭抗軸向拉力能力強,管件品種多。

  ◆重量輕, 運輸及施工方便,管材總體可靠性高。在正常條件下,使用壽命可達50年。

It has higher strength, rigidity and impact resistance than the strength of plastic pipe. Double-sided anti-corrosion, with the same corrosion resistance as plastic pipes.
The use temperature increases, the thermal conductivity is low, the external wall does not need thermal insulation in winter and does not condensate in summer.
The inner wall is smooth and scale-free, and the head loss is 30% lower than that of steel tube. Pipeline connection adopts electro-thermal fusion connection, which has mature technology, strong resistance to axial tension of electro-thermal fusion joint, and many kinds of pipe fitings.
Light weight, convenient transportation and construction, high overall reliability of pipes. Under normal conditions, the service life can reach 50 years.

執行標準

  衛生指標符合GB/T17292《生活飲用水輸配水設備及防護安全性評價指標》的規定。產品標準符合CF/T189- -2007。

The hygienic index conforms to GB/T 17292 "Safety Evaluation Index of Domestic Drinking Water Transportationand Distribution Equipment and Protection". The product standard conforms to CF/T189-2007.

技術要求

  顏色一般為黑色,也可根據我供需雙方協商決定。管材內、外表面應該光滑平順,允許有自然收縮:的微小凹坑和凸起,不允許有氣泡裂口、分解變色及明顯劃傷,管材兩端切割平整。

The color is usually black. It can also be decided by negotiation between the supplier and the buyer. The inner andouter surfaces of the pipes should be smooth and smooth, allowing for natural shrinkage of small pits andprotrusions, not allowing bubble cracks, decomposition and discoloration and obvious scratches, smooth cutting atboth ends of the pipes.

應用范圍

市政工程:城市給水、熱網回水、煤氣.天然氣輸送管道。

化學工程:酸、堿、鹽制造業、石化、化肥、制藥、化學、橡塑等行業輸送腐蝕性氣體、液體、固化粉末的工藝管及排放管。

油田氣田:含油污水、氣田污水、油氣混合物,二、三次采油集輸工藝用管。

熱電工程:工藝用水、回水輸送、除塵、廢渣等輸送管道。

冶金礦山:有色金屬冶煉中的腐蝕介質輸送和礦漿、尾礦工藝用管。

高速公路:埋地排水管、電纜疏導管。

海洋工程:海水輸送、海底管線及光(電)纜導管等。

船舶制造:船舶污水關、排水管、壓艙水管、通風管。

Municipal Engineering: Urban Water Supply, Heat Network Backwater, Gas and Natural Gas Pipeline.
Chemical engineering: process pipes and discharge pipes for conveying corrosive gases, liquids and solidifiedpowders in acid, alkali,salt manufacturing, petrochemical, fertilizer,pharmaceutical, chemical, rubber and plasticindustries.
Oilfield gas field: oil-bearing sewage, gas field sewage, oil-gas mixture, pipeline for secondary and tertiary oilrecovery gathering and transportation process.
Thermoelectric engineering: process water, backwater transportation, dust removal, waste residue and othertransportation pipelines.
Metallurgical mines: pipes for conveying corrosive media and pulp and tailings in non-ferrous metal smelting.Expressway: buried drainage pipe and cable dredging pipe.
Ocean engineering: sea water transportation, submarine pipelines and optical (electrical) cable conduits, etc.Shipbuilding: Sewage Gate, Drainage Pipe, Ballast Pipe, Ventilation Pipe.

 

已被瀏覽 738 次
上一頁:PE礦用瓦斯抽放管       下一頁: 鋼絲網骨架塑料復合管